Home > Guides > LMS > Canvas

Canvas - Install Aktiv Multi Column Sync (V2)

(for Aktiv Team)

PART 1: Pre-Setup:

1. Install a Willo Labs Customer. You will need the LMS Admin’s email address.

2. Install a Willo Labs Configuration.

3. Install a Willo Labs Integration.

4. Install an Admin Site LTI Source.

PART 2(a): LMS Admin (On Call / Hand-Holding)

Use this section if you take an integration call with the LMS Admin, otherwise skip to next section.

1. In the LMS, guide the LMS Admin to setup a Canvas LTI External Tool. Have at hand the Launch URL, Consumer Key and Consumer Secret that you got from the Willo Labs installation above.

2. In the LMS, you should guide the LMS admin to setup a Canvas Developer Key.

3. Then use Willo Labs Developer Key Integration to guide the LMS admin to integrate their newly created Canvas developer key with Willo Labs.

PART 2(b): LMS Admin (DIY)

Use this section if you just want to email the LMS Admin with instructions so that they complete it themselves.

1. Send the LMS admin an email referencing the following guide providing also the Launch URL, Consumer Key and Consumer Secret that you got from the willo labs installation above. For e.g:

   Dear [LMS Admin] of [University],

   Please visit https://help.aktiv.com/guides/lms/canvas/lms-canvas-install-v2 for a complete guide to install Aktiv to be able to perform multi-column syncing.

   You will need the following data:

   - Launch URL: [Url]

   - Consumer Key: [key]

   - Consumer Secret: [secret]