Home > Guides > LMS > Brightspace

Brightspace - Install Aktiv Single Column Sync (V1)

(for Aktiv Team)

PART 1: Pre-Setup

1. Install a Willo Labs Customer. You will need the LMS Admin’s email address.

2. Install a Willo Labs Configuration.

3. Install a Willo Labs Integration.

4. Install an Admin Site LTI Source.

PART 2(a): LMS Admin (On Call / Hand-Holding)

Use this section if you take an integration call with the LMS Admin, otherwise skip to next section.

1. Setup a call with the LMS admin to guide them with the installation of a Brightspace LTI External Tool. Have at hand the Launch URL, Consumer Key and Consumer Secret that you got from the Willo Labs installation above.

PART 2(b): LMS Admin (DIY)

Use this section if you just want to email the LMS Admin with instructions so that they complete it themselves.

1. Send the LMS admin an email referencing this guide. You’ll also need to send them Launch URL, Consumer Key and Consumer Secret that you got from the Willo Labs installation above.

   Dear [LMS Admin] of [University],

   Please visit https://help.aktiv.com/guides/lms/brightspace/lms-brightspace-install-v1 for a complete guide to install Aktiv to be able to perform single-column syncing.

   You will need the following data:

   - Launch URL: [Url]

   - Consumer Key: [key]

   - Consumer Secret: [secret]