Aktiv Learning

Logo

View the Project on GitHub Aktiv-Learning/Aktiv-Help

Home > Guides > LMS > Sakai

Sakai - Install Aktiv Grade Sync (V1)

(for Aktiv Team)

Use this guide to install/integrate (from scratch) Aktiv into Sakai to perform single-column syncing via LTI.

PART 1: Pre-Setup

  1. Install a Willo Labs Customer.

  2. Install a Willo Labs Configuration.

  3. Install a Willo Labs Integration.

  4. Install an Admin Site LTI Source.

PART 2(a): LMS Admin (On Call / Hand-Holding)

Use this section if you take an integration call with the LMS Admin, otherwise skip to next section.

  1. Setup a call with the LMS admin to guide them with the installation of a Sakai LTI External Tool. Have at hand the Launch URL, Consumer Key and Consumer Secret that you got from the Willo Labs installation above.

PART 2(b): LMS Admin (DIY)

Use this section if you just want to email the LMS Admin with instructions so that they complete it themselves.

  1. Send the LMS admin an email referencing this guide. You’ll also need to send them Launch URL, Consumer Key and Consumer Secret that you got from the Willo Labs installation above.

    Dear [LMS Admin] of [University],

    Please visit https://help.aktiv.com/guides/lms/sakai/lms-sakai-install for a complete guide to install Aktiv to be able to perform single-column syncing.

    You will need the following data:

    - Launch URL: [Url]

    - Consumer Key: [key]

    - Consumer Secret: [secret]